HomeSaver Dial-A-Flex Relining Pipe
94 Custom Square And Rectangular Sizes. HomeSaver Dial-A-Flex gives you the ablility to reline virtually any size chimney flue. This means no more walking away from repairing that flue.
Simply look at the size chart (below), pick the size you need. Phone us and we will get you custom order on its way.
HomeSaver also offers 18-ga. custom top/bottom plates for each Dial-A-Flex size. On a special order basis, we custom trim these plates to the exact outside dimensions you'll need. Scroll down to view picture and information.
Naturally, Dial-A-Flex should be insulated according to the guidelines on our Insulation Page.
All Dial-A-Flex sizes are available in either 304-alloy stainless (lifetime warranty for wood burning applications) or 316-alloy stainless (lifetime warranty for wood, coal, oil, and non-condensing gas applications). HOMESAVER WARRANTIES PDF FILES
Just look at the huge array of sizes in the chart below and you can see why Dial-A-Flex is so popular. Down the left side of the chart is your Dial-A-Flex liner small side. Across the top of the chart is your liner large side. Simply read across to find the size you need for your specific job.
For instance, If you need 10" x 14":
OR once you've determined the Dial-A-Flex length to order, Call us to order and the rest is easy.
Finish the installation by using Dial-A-Flex top/bottom plates and top/bottom support brackets. Add an appropriate Gelco Knock-Down Top with 12" mesh and you're done!
BE SURE TO READ PRODUCT AND ORDERING NOTES AT BOTTOM OF EACH PAGE.
SMALL SIDE LARGE SIDE (Follow the column to the bottom of the chart to find price and weight per foot.)
Use price from the chart above to order below. Find the same price and add to cart the quantity for the length you would like to order. You will then need to email us the dimensions of the special order Dial-A-Flex you need to have made.
ORDERING NOTE: Available only as a special order - 10' to 50', except as noted in the following shipping notes.
PRODUCT NOTE: Flex pipe compresses during shipping and may need to be streched out - instuctions included with all pipe.
PRODUCT NOTE: All dimensions are outside - for inside dimensions deduct 1/4".
PRODUCT NOTE: The corners of Dial-A-Flex are slightly rounded - please allow for this when ordering.
PRODUCT NOTE: Tolerance on small side and large side is +0" and -3/8".
On a special order basis, we can provide 18-ga. custom top/bottom plates with the exact dimensions you need when you order HomeSaver Dial-A-Flex or FireplaceFlex. Note: plates have no lip around opening.
The biggest outside dimension available is 24" x 24". The minimum outside dimensions must be 3" larger than the liner. Before ordering Dial-A-Flex plates, please refer to the "Weight per Foot" section of the chart on the Dial-A-Flex page. Always use two top plates when the total weight of your installation exceeds 150 lbs.
Though convenient, this Universal Flex Connecting Band does not provide a "male-end-down" connection. Use only when a flex connector-adaptor is not available (as with Dial-A-Flex). Requires Make-A-Clamp Kit and pop rivets.
Product Note: CAUTION - this connecting band does not provide a male/female connection - use only when a regular Flex connector-adaptor is not available.
With HomeSaver Dial-A-Flex we recommend finishing wiht a Gelco Letter Model Knock-Down Top with 12" mesh or a Chimney Protector with 10" mesh.
Be sure the Flex protrudes no more than 3" above the top of your top plate.
Make sure the combined height of liner and tile extend into the cap no more than 4" for the 10" high Chimney Protector and no more than 6" for the caps with 12" high mesh. This ensures adequate clearance for the liner.
Note: some sizes of these caps are UL Listed as a termination for HomeSaver Pro or UltraPro, HomeSaver RoundFlex, RectangleFlex, and Small and Large OvalFlex. See Reversible Single/Multiflue Caps for all models available.
Product Note: FL indicates freight line shipment.
Ordering Note: Cut-to-length pieces of HomeSaver liner are NON RETURNABLE, so please order carefully.
Ordering Note: Available as a special order in custom lengths of 10' to 50'.
Product Note: Tolerance on small side and large is 0" and -3/8". To get the inside dimensions simply deduct 1/4".
Product Note: Flex pipe compresses during shipping and may need to be stretched out - instructions for stretching are included with all pipe.
Product Note: All special order HomeSaver Flex pipe must ship via freight line. Carriers require packaging on all liners. This cost will be calculated after we have shipping address.