HomeSaver UltraPro 316-Alloy SS Relining Pipe
|
HomeSaver UltraPro is changing the rules! Our .005" light liner is made differently than the competition. Our machines are new technology and state of the art. As a result our .005 UL/ULC Listed UltraPro has superior crush resistance and does not kink as it comes out of its shipping box - all for a super competitive price. How is it done? The machinery and the process design. Start with the .005" 316 Ti stainless raw material that all brands use. But the high tech machines and patented design create way more strength and way more flexibility in the finished product - where it counts. IT'S READY TO INSTALL - NO WRESTLING TO GET IT STRAIGHT UltraPro lets you say goodbye to the agony of unkinking your light liner out of its UPS shipping box. "Time is money" - no need to waste it unkinking lesser liners when you can use UltraPro. IT'S PRICED WAY DOWN THERE Although our main mission was to build quality and convenience into UltraPro, our design lets us offer it at a better price. UltraPro is a lot lower than even our original HomeSaver Pro. SUPER WARRANTY - HOMESAVER WARRANTIES PDF FILES Naturally UltraPro is UL/ULC Listed when installed according to the instructions, and it comes with a lifetime warranty for wood, coal, oil and Category 1 gas appliances. The warranty is actually longer than lifetime because it is fully transferable to future owners of the home where UltraPro is installed. This improved warranty applies to all HomeSaver liners. INSTALLATION AND MAINTENANCE INSTRUCTIONS FOR HOMESAVER ULTRAPRO
WOW! No rivets or screws with
UltraPro! Pop rivets or screws aren't to be used with UltraPro. A problem? Nope, our components are all designed with hose clamp connections - no fumbling with screws or rivets. BE SURE TO READ PRODUCT AND ORDERING NOTES AT BOTTOM OF EACH PAGE.
UltraPro Relining Pipe
BE SURE TO
ORDER CAREFULLY.
UltraPro Kits
HomeSaver Pro & Ultra Pro End-Cones
Use a 20-ga. end-cone to pull HomeSaver down past bends. Or attach to the Super Winch cable and pull RoundFlex up the flue.
CollarPlate
Pyramid & Terra Cotta CollarPlates 304-alloy
Collar Plate Rain Cap & Guardian Cap
Tees and Connector Adaptors with Band Connections See chart for tee heights and take-off lengths at bottom of page.  
HomeSaver UltraPro uses a tee and connector adaptor
with band connectors.
3" FEMALE to 4" FEMALE
5.5" to 6" ADAPTOR
PELLET VENT PRO ADAPTORS
Short Flex Tee with Band Connection and 5 or 10" Removable Take-Off
Tee cover sold separately. There are many variances in tee lengths/take-off lengths of all tees. See price list for complete charts on tee specifications.
Take-Off Options for Tees
Universal Take-Off 9 inch
Top/Bottom Plates
These plates are part of the UL/ULC system Listed in 3"-8" diameters for use with HomeSaver liners. The hole in these plates is sized just big enough to let HomeSaver slip through during an installation and allow for thermal expansion. Naturally, these can be used either as a top plate - sealing the top of an installation, or as a bottom plate - giving bottom support for a fireplace reline. In the latter instance, these plates work perfectly when used in combination with our Bottom Plate Leg Support System, featured in Reliner Adaptors, Etc.
Elbows with Band Connection
Cast-Iron Insert Boot and Adaptor   The adaptor provides a connection from Pro or UltraPro liner to a RoundFlex cast-iron insert boot. The adaptor attaches to the insert boot collar with screws.
Insulation Kits
With both relining kits and insulation kits we've got your convenience needs covered. When should I insulate? Insulation is required for the liner warranty and UL 1777 listing for a solid fuel application. UL 1777 simulates severe usage in a residential setting including simulated chimney fires. A liner can only pass the heat transfer section of the test with proper insulation. Insulation prevents excessive heat transfer through the chimney structure to surrounding combustibles which otherwise could ignite. It also helps to reduce creosote deposits by keeping the flue gases hotter (contributing to a better draft).
Ordering Note: Cut-to-length pieces of HomeSaver liner are NON RETURNABLE, so please order carefully. Product Note: Outside dimensions of HomeSaver Pro/UltraPro Liners are determined by adding 3/8". Product Note: FL indicates freight line shipment. You will be contacted with any additional shipping costs before order is fully processed. Product Note: The 3" x 25', 4" x 25', 5" x 25', 5.5" x 25', and 6" x 25' relining kits ship UPS, all other kits must ship via freight line. Product Note: HomeSaver Pro/UltraPro Liners can be sued in conjunction with Heat-Fab pipe and fittings. If Heat-Fab is installed above the HomeSaver Pro/UltraPro Liners in an installation, no adaptor is needed. If the HomeSaver Pro/UltraPro is above Heat-Fab, use a connector-adaptor for the connection. Product Note: The 5.5" tee comes with a 6" removable take-off. The bottom of the tee is also 6" so a 6" tee cover works perfectly on this item. HOMESAVER ULTRAPRO TEE HEIGHTS AND TAKE-OFF LENGTHS HomeSaver UltraPro 316 Ti Tees With Removable Uncrimped Take-Off With Band Connections
HomeSaver UltraPro 316 Ti Short Tee With 10" Removable Uncrimped Take-Off With Band Connections
|
Though you can get UltraPro in custom or precut lengths,
these ready-to-go kits are a super convenient option, too.
Each one contains an improved, welded-water-tight 13" x 13"
CollarPlate, and a CollarPlate Rain Cap - all with band connections
and 3/4" mesh, tee with removable take-off and band connection, tee
cover. Available in 25', 30', and 35' lengths. (See our
price list for what diameters are available.) Or, you can buy
just the components (without the liner) in kit form,
too. 
Insert Kit. 
These end-cones in 4" - 8" are OUTSIDE MOUNT
for both our HomeSaver Pro and UltraPro liners. No
more need to drill holes and attach with screws. The 3" End-Cone screws INTO liner.
Our CollarPlate supports the entire HomeSaver UltraPro
installation. It combines the top plate, storm collar and top
clamp into one convenient piece. Its built-in clamp just
tightens with a screw driver. The CollarPlate now features a
welded, watertight seal. 
Pyramid • collarplate with
built-in clamp
• raised to add strength and
shed water is only available in 13 x13 inch size.
Terra Cotta CollarPlate • same great collarplate with
built-in clamp but with a
formed bottom plate to anchor
into the sides of the tile. Available in 9 x 9, 13 x 13 and 13 x 18 inch sizes. 
Top Clamp (lower left) & Storm Collar (upper) 
The CollarPlate Rain Cap with 3/4" mesh is a
band connection version of our popular Guardian Cap. Just
attach it to the CollarPlate, turn a screw to tighten, and you're
done. See the finished installation shown in second
picture. 
The shorter body length of these tees offers greater
user-friendliness in lots of installations. The second great
feature of this tee is its long 10" take-off with band connection;
the other tee's take-offs are only 5" and 22".
There are two 316 stainless take-off options
here. The long one is uncrimped and 22" allowing for
connections thru thick chimney walls. The other is crimped and
5" allowing for a male end down on solid fuels. They are sold
separately - use them with a HomeSaver Tee. Available in 6"
and 8" diameter. 
4" Tee with 3" Take-off
• use this snout when venting gas directly
into HomeSaver liner by cutting
and sealing with RTV 
These 18-ga. 304-Alloy HomeSaver Top/Bottom Plates with
rounded corners feature a nice, tall, raised lip around the
hole. See price list for specific sizes for top plates with
3"-8" diameter holes.
Elbows are sectioned and nonadjustable, with band connection. Available in 6" and 8" and in 15, 30, 45, or 90
degrees. No rivets or screws needed on band
connection end. 
Offset Insert Adaptor, requires Offset Insert Adaptor Adaptor!
These great kits give
you just the 1/2" HomeSaver Foil-Face FlexWrap you need for
either a 25', 30', or 35' reline job. Think of it, no
measuring and cutting. And these kits work for both Pro and
UltraPro installations. Each kit also contains ArmorMesh,
spray adhesive, foil tape, and a clamping kit. Remember,
insulation is needed for a UL/ULC Listing with HomeSaver, so be sure
to read our entire insulation features.
