Replacement Fireplace Screens
|
When your pre-installed Fireplace Screens start to fall apart, you can easily change them out with our Replacement Screens. You will find six different choices for beautiful custom spark screens. We offer two different brands of replacement screens, pulls, rods and a valance with rods all shown below. Be sure to pick up some High Temperature Dry Graphite Lube to keep screens moving freely. You can custom order our popular HomeSaver Fireplace Spark Screens in Stainless steel, Solid Copper, Solid Brass, Black or even custom Painted. You can also order screen pulls to match.
204 DRY GRAPHITE LUBE; ITEM #603-10 FL OZ SPRAY CAN @ $18.00 Most of the time when repairing curtain screens you will find that the screen itself is ok. What has happened is the rod the screen runs on has not been lubricated since installation. It is now rusted and makes the loops that hold the screen up sticky. Home owner pulls harder, things break! This is a high-temp Graphite spray on lube (good to 1000 deg. F) that will make the screen move freely again. Just spray the rod the screen runs on (use a piece of cardboard to catch the over spray), then replace the broken or missing rings (some bailing wire works good) that hold the screen to the rod and any screen pulls if necessary and you will have a smooth running screen assembly. This product will have a lot of uses other than making screen run smoothly. How many places around a fireplace haven't been lubed since it was built? Temperatures up to 850°F constant and 1000°F
intermittent. REPLACEMENT SCREENS; Fireplaces with glass doors, zero-clearance,
pre-fabs, and just plain old
masonry have the "curtain-type" screens, and they are great when
they work! SEE NOTE BELOW PRICES FOR SIZING
INFORMATION. Each Package has 2 (16" to 27")
HIGH BY 24" WIDE SCREENS @ SET $58.00 2 SCREENS EACH HEIGHT X
WIDTH ITEM
#
PRICE ADD TO CART 16"h x 24"w 17"h x 24"w 18"h x 24"w 19"h x 24"w 20"h x 24"w 21"h x 24"w 22"h x 24"w 23"h x 24"w 24"h x 24"w 25"h x 24"w 26"h x 24"w 27"h x
24"w Each
Package has 2 (29" to 30") HIGH BY 30" WIDE SCREENS @ SET
$70.00 Each
Package has 2 (31" to 34") HIGH BY 30" WIDE SCREENS @ SET
$76.00
2 SCREENS EACH HEIGHT X
WIDTH ITEM
#
PRICE ADD TO CART 28"h x 30"w 29"h x 30"w 30"h x 30"w 31"h x 30"w 32"h x 30"w 33"h x 30"w 34"h x
30"w NOTE: EACH SCREEN COMES WITH PULL HANDLE AND INSTALLATION RINGS. NOTE: OVERALL HEIGHT IS 1/2" HIGHER THAN PANEL HEIGHT
LISTED;
SCREEN PULLS; ITEM #41631 (2)BRASS @SET $9.50
RODS FOR REPLACEMENT SCREENS; ITEM #61090-2 RODS WITH HOLDER & SCREWS @SET $19.95
VALANCE & RODS; ITEM #625-31" TO 46" EXTENTION @ $60.00 WOODFIELD
HANGING SPARK GUARDS SIZE Item
# PRICE ADD TO
CART 48" x 18" 61076 $ 39.95 48" x
20" 61078
$ 39.95 48" x
22" 61080
$ 39.95 48" x
24" 61082 $ 39.95 48" x
26" 61084 $ 44.95 48" x
28" 61086
$ 44.95 48" x
30" 61088
$ 49.95 CUSTOM HOMESAVER SPARK
SCREENS; THESE ITEMS ARE
CUSTOM ORDER AND NON-RETURNABLE. Screens can be ordered in 1/4" standard
mesh, 3/16" mini-mesh, or even specify a different-sized mesh!
Measure carefully, these are nonrefundable. CONTACT
US for more
information |
Perfect for replacing curtain-type spark screens!
These 19ga., 1/4" mesh, screens are sold in sets of two, 24" wide
panels. Screen pulls are included and are also sold
seperately. Available in 2" height increments from 18" to
30". Replacement rods, sold separetly, adjust to 58"
maximum. 
You can custom order our
popular HomeSaver Fireplace Spark Screens in Stainless steel, Solid
Copper, Solid Brass, Black or even custom Painted. You
can also order screen pulls to match.
