Dura-Vent DuraLiner Relining System
|
DuraLiner is DuraVents' premium high temperature, all fuel masonry relining system. It is designed to provide resistance to creosote buildup in oversized masonry chimneys venting open fireplaces or appliances. The best thing about DuraLiner is the rigid pieces are double-wall, factory insulated, so there is no need to insulate on the job. However, you do need to insulate any portion of DuraLiner flex pieces used above the first flue tile. DuraLiner is available in both rigid and flexible configurations. Connections are made using the rivets provided with each piece. Just pop the rivets into the holes in the factory fittings and you're done. DuraLiner is UL listed for zero clearance between masonry and combustibles and between the liner and the interior masonry of the chimney, provided proper insulation is used on flexible sections.
*We will contact you after you order with the exact shipping cost to ship to your area if items are more to ship to you than cart charged. Click here for shipping disclaimer. Components listed seperately below
NOTE: Slip Connector and Hanger are needed also...(listed up above this).
YOU WILL NEED INSULATION CLAMP ALSO
*We will contact you after you order with the exact shipping cost to ship to your area. Click here for shipping disclaimer. |
Round
Flex Pipe - Available in 36 and 60 inch
lengths 
Oval Flex Pipe -
Available in 36 and 60 inch lengths 
Oval to Round Flex Pipe
- Available in 36 and 60 inch lengths 
Round
Rigid Pipe - Available in 12, 24, 36 and 60 inch
lengths 
Oval
Rigid Pipe - Available in 12, 24, 36 and 60 inch
lengths 
Adjustable Sleeve (shown)
and Flex Adaptor, Round/Oval (not
shown) 
45 degree Elbow shown here. 
The DuraLiner Round Cap Kit terminates round
DuraLiner at the top of the masonry chimney. Each kit includes
a base plate, a support clamp, a storm collar, and a cap with spark
arrestor. 
The DuraLiner Oval Cap Kit terminates oval
DuraLiner at the top of the masonry chimney. Each kit includes
a base plate, a support clamp, a storm collar, and a cap with spark
arrestor. 
The Masonry Thimble With Adjustable Sleeve
penetrates a masonry chimney to connect a single-wall stovepipe to
DuraLiner. Allow an additional 1/2" greater masonry hole size
than the masonry thimble sleeve diameter. After installation,
seal space between Masonry thimble Sleeve and masonry with high
temperature sealant. 
Slip Connector And Hanger - in chimney
restoration, use the transition anchor plate to transition from
DuraLiner to DuraTech, DuraPlus, or DuraPlus HTC
chimney. 
These DuraLiner Stove Top Connectors connect insert
outlets to DuraLiner. 
DuraLiner
Stove Top Angled Connectors connect insert outlets to
DuraLiner and are available in three options. Choose from Oval
to Oval 30 degree angle, Oval to Round 30 degree angle and Round to
Round 30 degree angle. 
Transition Plate - Use with slip
connector on lined, masonry chimney restoration to connect DuraLiner to DuraTech and DuraPlus. 
Universal Insulation Clamp, round/oval AND Oval Spacer 
The DuraLiner Combustible Wall Pass Through
provides and attractive, safe method of connecting DVL with a
DuraLiner tee when it must pass through a combustible wall. UL
tested and listed to 2100 degrees F with zero clearance to
combustibles. 
Two-Ply Insulation Sleeve - Round/Oval, 60"
length. 
