Heat-Fab 22-Ga. Welded Black Stovepipe
|
Heat-Fab's 22-ga. black stovepipe features laser welded construction-the very same construction that Heat-Fab uses in manufacturing it's excellent line of UL Listed stainless steel relining pipe. The 22-ga. metal gives a nice 25% increase in wall thickness over run of the mill 24-ga. pipe. To top it off, each piece of pipe is painted flat black and is individually wrapped for maximum protection from scratching during shipping. We offer our 22-ga. line in 12", 18", 24", 36" and 48" lengths; and it all comes in 6"-8" diameters. 45 degree and 90 degree nonadjustable Elbows are available, as well as 90 degree adjustable Elbow, a 38" - 70" adjustable Lengths, two Oval-to-round Boots for Vermont Castings Stoves and Trim Collars. Full features on some of these components can be found below. There has been a move towards high-quality installations as the solid fuel industry has matured. For stovepipe installations we highly recommend Heat-Fab 22-ga. Welded Black Stovepipe. *We will contact you after you order with the
exact shipping cost to ship to your area.
Scroll down to view Oval-To-Round Boots for Vermont Castings Stoves, Adjustable & Corrugated Elbows, Tee Connector, Slip Connector and Adjustable Lengths of Stovepipe needed in some applications.
Oval-To-Round Boots For Vermont Castings Stoves
The boot on the left has an offset and is 9 1/2" high. The boot on the right gives you a straight connection and is 11 1/2" high. Both boots have 22 ga. welded construction. The oval male end dimension is 5 3/8" X 9 3/4", and the round female end accepts 8" diameter, 22 ga. stovepipe.
Adjustable and Corrugated Elbows
The 45 degree Corrugated Elbow, on left bottom, is designed for strength and is one piece so it won't leak or separate. The 90 degree, on top, also promotes strength and won't leak. These heavy-duty 22 ga. black elbows will provide years of use.
*We will contact you after you order with the exact shipping cost to ship to your area. Click here for shipping disclaimer.
For Stovepipe Installation Item such as Stovepipe & Mantel Shields, Self-drilling Screws, Magnetic Chuck Drivers and Heatsheild Spacers & Anchors see our Installations Extras. |
....and then there's
black stovepipe! This stuff's "The King" with its' extra
thickness and superior construction!
Here's the way to connect 8" stovepipe to most Vermont
Castings Stoves with an oval flue collar. 
The Adjustable Elbow, on right bottom, is
designed to be rugged and resists separating at the joints.
Adjusts up to 90 degrees and features a three sectioned
adjustment. 
This 304-alloy stainless steel Tee
Connector (painted black), provides a connection between
Heat-Fab 22 ga. Black Stovepipe and a tee with a female take-off,
such as the regular Heat-Fab Tee. This Tee Connector gives
added length when passing through the Thimble. It is 12" long
and has two male ends. Fits with most
stainless Tees that have a female take-off. 
Use this 22 ga. Black Slip Connector when the installation
doesn't come out "just right". It slides down into a piece of
pipe, and telescopes into it. When installed all the way, it
provides 4" in length. When installed, there is a maximum of
16" of useable pipe. So, when used with another piece of
pipe below, it adjusts 4" - 16". Overall length is
18". 
These Telescoping Sections adjust from 38" to
70". They eliminate time-consuming cutting and crimping to get
a "just right" installation. 
